How to clean cabinet hardware is a question frequently asked by people who are setting up their own kitchen in a new home or redecorating an existing one. There is no need to dread this task as long as you follow a few simple tips. You can accomplish the task without too much difficulty.

How to clean cabinet hardware begins with first removing any wax coating on the knobs or pulls. You can do this by wetting a soft damp rag with some vinegar and scrubbing the hardware. If there is any stubborn grime, repeat the previous step with vinegar and then again with a dry cloth.

If the stains remain, wipe the area with a damp sponge and rinse with water. When it comes to cleaning cabinet knobs and pulls, never use any ammonia-based cleaners or harsh sprays. Use only mild cleansers like liquid dishwashing detergent or a commercial-grade window cleaner.

For heavily soiled areas, use a shop brush and a stiff-bristled toothbrush to scrub the soiled area. Use a regular broom for lightly soiled surfaces. If you have any wooden cabinets that have been in your house for many years, chances are the knots and crevices in them have taken a lot of time and effort to create. This process outlined on Garage Gear Guru will surely serve as your main guide as it is so easy to follow.

If you have just moved into a new house or simply cannot remove the older cabinetry, you may want to give them a thorough clean using an all-purpose cleaner and a soft-bristled brush. Make sure to rinse all surfaces, especially those with a shiny finish, to eliminate the dirt, grease, and grime that may have collected over the years.

If your drawers are installed in new construction, you can safely clean them with a solution of water and vinegar. Let the solution sit for at least five minutes before scrubbing the drawers with a soft cloth. Do not use a harsh brush as this will likely scratch the surface. After rinsing, thoroughly dry the drawers using a towel.

To add to the cleanliness, spray some light lubricant on the drawer hardware prior to wiping it down. As for how to clean cabinet boxes, if you are planning to install new drawers into your boxes, clean them down as you would any other hardware. You should then put them in the washer and dryer to complete the cleaning process.

To clean the boxes themselves, make sure to clean them completely in hot soapy water. Scrub all surfaces, including the drawer fronts and the bottom. Once the hardware dries completely, you can then place them back in their storage bins.

If you want to restore your hardware to its original look, you can follow a few steps to ensure that the stains do not affect the finish. The first step is to remove all soap and moisture from the hardware by soaking the pieces in warm soapy water.

You may also choose to purchase a special soap designed specifically for wood or metal cleaning. Allow the soap solution to sit on the surface of the piece for a few minutes, then wipe the pieces off with clean water and a soft dry cloth.

If you prefer to try a more natural approach, you may also use white vinegar for cleaning your hardware. Using white vinegar is easy to do. Simply mix up a solution consisting of half water and half white vinegar.

Apply the solution to the drawer surfaces using a soft cloth or a sponge and rub it into the stained areas until the stains are removed. If the stain remains, repeat the process until it is gone.